The diameter of the branches to be cut

80 mm (soft wood)

Chips length

70-80 mm (2 knives)

Power demand

25-28 km

PTO revolutions

Max 540 rpm

Number of rollers pulling the branches

1 piece.

Roller drive

Mechanical

Mass

200 kg

Overall dimensions of the chipper

AxBxH 2250 mm x 950 mm x 2090 mm

The chipper has a trailer hitch

 

 

PRODUCT DESCRIPTION

The RD-107S is a model that provides good performance at a relatively low price. Designed for tractors with a power from 25 to 28 HP, driven by a power take-off shaft (PTO). The model is equipped with a mechanical safety switch that allows stopping the device in an emergency.

The chipper is used to cut branches into sections of approximately 80 mm with two cutting knives, 40 mm with 4 knives and 20 mm with 4 knives and slow feed. The device allows you to cut branches up to 80 mm thick with branches made of soft wood.

Recommended especially for fruit growers, but also for users who need the wood chips to be poured onto a trailer, which is attached to a chipper mounted on a tractor or directly to the ground.

Chippers are equipped with attachments for bagging (baggers) of chips. The cut pieces of branches (wood chips) are collected into mesh bags attached to the bagging bag.

DEVICE PRICE LIST

RD-107S - 1 600 EUR net + 23% VAT (1 968 EUR gross) – version with 360 ° ejector, 1 pulling roller + clutch disengaging the drive of the shaft pulling branches


RD-107S in a version with four knives and with a reduced feed - 2 100 EUR net + 23% VAT (2 583 EUR gross). Chips length: approx. 20 - 25 mm.


Attachment for bagging for two bags for an additional fee 250 EUR net + 23% VAT (307,50 EUR gross).

Wood chipper RD-107SP

 

Wood chipper RD-107SP

The diameter of the branches to be cut

80 mm (soft wood)

Chips length

70 - 80 mm (2 knives)

Engine

24 HP, petrol (after agreeing with the customer, another engine may be installed)

Number of rollers pulling the branches

1 piece.

Roller drive

Mechanical

Mass

600 kg (chipper + trailer)

DMC

750 kg, driving license category B

Trailer approval

Yes

 

PRODUCT DESCRIPTION

The RD-107SP is a model that has the same advantages as the version powered by the tractor's PTO. However, it is equipped with a 24 HP internal combustion engine, mounted on an approved car trailer (DMC 750 kg), which allows it to be attached to a delivery vehicle and quickly move off-road. This chipper, like its earlier version, is used to cut branches into sections of approximately 80 mm with two cutting knives and 40 mm with 4 knives. The device allows you to cut branches up to 80 mm thick with branches made of soft wood.

DEVICE PRICE LIST

Cena RD-107SP – 7 400 EUR net + 23% VAT (9 102 EUR gross) – version with 360 ° ejector, 1 pulling roller + clutch disengaging the drive of the shaft pulling branches, mounted on an approved trailer (DMC 750kg) with a 24kM combustion engine

Attachment for bagging for two bags for an additional fee 250 EUR net + 23% VAT (307,50 EUR gross).

Wood chipper RD-107S with an electric motor

 

The diameter of the branches to be cut 60 - 70 mm (7.5 kW motor),
70 - 80 mm (11 kW soft wood motor)
80 mm (15 kW motor with 4 soft wood knives)
Chips length 20 - 80 mm
Number of rollers pulling the branches 1 piece.
Roller drive Mechanical
Mass 280 - 300 kg
 

PRODUCT DESCRIPTION

The chipper RD-107 S with an electric motor is built on the basis of a chipper driven by a tractor's PTO. The engine is controlled by an electric box, which secures the proper operation of the chipper. It also has, like other models of RD-107S, a mechanical safety switch and additionally an electric safety switch.

Two wheels are mounted to facilitate the movement of the chipper at short distances. A bagging can also be mounted on this model.

 

There are chippers with a 7.5 kW, 11 kW and 15 kW engine available for cutting branches:

  • 7.5 kW for cutting branches up to approx. 60 - 70 mm thick
  • 11 KW for cutting branches up to approx. 70 - 80 mm thick
  • 15 KW with four knives, for cutting branches up to approx. 80 mm thick

DEVICE PRICE LIST
with a 7.5 kW motor for cutting branches up to about 60 - 70 mm thick - 4 100 EUR net + 23% VAT  ( 5 043 EUR gross).
with 11 KW motor for cutting branches up to about 80 mm thick -  4 300 EUR net + 23% VAT  ( 5 289 EUR gross).

with a 15 KW motor with four knives, for cutting branches up to about 80 mm thick - 5 200 EUR net  + 23% VAT  ( 6 396 EUR gross).

 


Attachment for bagging for two bags for an additional fee 250 EUR net + 23% VAT ( 250 EUR gross).